The reflective film of road traffic signs is usually 3m reflective film. What color to use depends on the function of the signboard. Because the color of the reflective film is more
The reflective films used in general traffic signs include engineering-grade reflective film, super-engineering-grade reflective film, high-strength reflective film, super-strength reflective film and even diamond-grade reflective film.
How to post road traffic signs?
The pasting of the reflective film is also an important process. If the pasting is not good, it is easy to foam and affect the life of the signboard. Its general operation steps are as follows:
1. First of all, we need to choose the appropriate reflective film according to the requirements of the drawings to paste the overall layout of the sign. During the pasting process, we should try our best to make the reflective film and the layout stick to each other. If there are bubbles, we must puncture the bubbles and press them again.
2. Then we paste the layout information, usually the layout information is pasted separately in the form of fonts. This requires us to typeset and paste according to the requirements of the design drawing during the pasting process.
3. Finally, we pack the completed signboard layout with plastic film to prevent dust and dirty layout information.
The role of reflective film for road traffic signs
1. The main function of the traffic sign is to show the moving vehicles, and the driving vehicles must be seen clearly, then the content of the sign must be clear and durable, and the reflective film can meet this condition;
2. The reflective film has a reflective effect, so the content of the traffic sign can be seen from a long distance when the vehicle is driving at night, so that the driver can clearly see the vehicle;
3. Reflective film can make up for the shortcomings of no street lights, so that drivers can drive safely, ensure unnecessary things happen, and reduce the frequency of car accidents.
