Class 2 Reflective Vinyl
DINGFEI Reflective Sheeting For Traffic Signs was specially developed for the manufacture of traffic control and guidance signs, warning signs, and information signs as well as for reflective lettering, numbers, and symbols, which are intended for long-term outdoor use. And it has an adhesive with excellent adhesion on metallic surfaces as aluminum and zinc-coated steel plate. Fully CE Accredited Glass Bead, Micro-Prismatic and Translucent Products for use on Permanent Traffic Signs, Bollards, and Delineators. Temporary Traffic signs, Road Cone and Delineators as well as Translucent Traffic signage.
Each reflective sheeting type offers a different level of retroreflectivity. Choosing the right sheeting makes a difference in a driver’s ability to recognize a sign. Drivers will recognize brighter sheeting sooner from a farther distance. In addition to reflective sheeting, we offer protective overlay film to help protect your sign. A description of the four sheeting types we offer:
Engineer Grade Prismatic (EGP) - typically used in areas of low traffic volume, low speeds, and minimal competing light. Signs that commonly use Engineer Grade are parking signs and no trespassing signs. Engineer Grade meets ASTM D Type I specifications for retrorefelctivity.
High Intensity Prismatic (HIP) - HIP provides higher levels of retroreflectivity versus engineer grade and standard high intensity. Where high intensity uses encapsulated glass beads, HIP uses prismatic technology to provide increased retroreflectivity levels four times brighter than engineer grade. HIP is effective in both well-lit areas and in areas with low levels of light in the vicinity. Signs that commonly use HIP are stop signs, speed limit signs, and crosswalk & pedestrian warning signs. HIP meets ASTM D Type III & Type IV specifications for retroreflectivity and is backed with a 10-year warranty.
Diamond Grade (DG3) - highly reflective microprismatic sheeting used on signs that must be seen by road users in all types of traffic and weather conditions. Diamond grade is commonly used on freeway & highway signs, school zone signs, street name signs, and stop signs. Our Diamond Grade options meet ASTM D Type IX & Type XI specifications for retroreflectivity and are backed with a 12 year warranty.
Protective Overlay Film (POF) - applied to reflective signs, protective overlay film (POF) is a transparent film that protects signs against common types of sign defacement. If a sign is defaced, the film surface can be cleaned with a mild solvent and water to restore sign performance and control replacement cost of the sign. Signs mounted below eight feet above ground are popular targets for sign defacement.
