Our Reflective Traffic Cone Collars / Sleeves insure that your traffic cones will be seen at night.
To install the collars you can wrap them around the cone with the backing still on until the ends are lined up. Then hold the collar in place and take a piece of masking tape and tape one end of the collar to the cone thus creating a hinge. Next you would simply peel the backing off starting at the hinge and work your way around. The two ends should meet perfectly.
Sleeve features an adhesive strip running down vertically on one end. Simply peel off adhesive liner and stick to opposite end of the collar to install on your cone.
Unlike competitor stick on cone tapes, the reflective cone sleeve is reusable and can be removed when not needed.
Equipped with prismatic reflectivity the cone collar sleeve is highly visible in dark, low light areas - a great safety feature to any facility or property. Replace old, worn out reflective tape or add it to non-reflective traffic cones to enhance visibilty.
Cone collar is 9.5" in height and fits around 18" or 28" standard size cones. Collar can be used on 36" cones, but may fit a little loose as 36" cones tend to be slimmer towards the top.
