Engineer Grade Retroreflective Sheeting
The most basic type of retroreflective sheeting is Engineer Grade (EG), which is also referred to as Type I. EG is made up of small glass beads, which are either enclosed in a translucent pigmented substrate or two layers of prismatic sheeting. Engineer Grade retroreflective sheeting doesn’t have a distinctive pattern. It is recommended for commercial and non-critical traffic sign applications.
When EG sheeting is applied properly, it can be expected to deliver retroreflection for five to seven years. Road signs with EG sheeting are visible from 400 to 600 feet away.
DINGFEI Reflective Sheeting For Traffic Signs was specially developed for the manufacture of traffic control and guidance signs, warning signs, and information signs as well as for reflective lettering, numbers, and symbols, which are intended for long-term outdoor use. And it has an adhesive with excellent adhesion on metallic surfaces as aluminum and zinc-coated steel plate. Fully CE Accredited Glass Bead, Micro-Prismatic and Translucent Products for use on Permanent Traffic Signs, Bollards, and Delineators. Temporary Traffic signs, Road Cone and Delineators as well as Translucent Traffic signage.
1. Easy to apply on any clean, smooth surface.
2. Easily removable, and will NOT damage to your paint during or after installation.
3. Using high-quality adhesive glass beads reflective film reflective.
4. High stretchable ability, and ultimate in flexibility to most curved surfaces.
5. Resistant to water, solvents, gasoline, and sunlight for long-lasting use.
6. Highly reflective and wide-angle reflection, even up to 90-degree angle.
7. Super durable. High visibility, Waterproof.
